Minarik Drives DC to DC Series Drives

The DC-DC Series are DC in/DC out PWM chassis drives. These feature rich drives include inhibit for remote starting and stopping, a power LED, and trimmer pot adjustments for minimum speed, maximum speed, acceleration, IR comp, and current limit. All trimmer pots are non-interactive making calibration quick and easy.

Download the DC Series Product Manual (pdf: 844k)

The DC-DC Series is available in three sizes: 16A and 60A units for 12 or 24 VDC motors and a 60A unit for 36 or 48 VDC motors. Configuring a DC Series drive for a specific motor voltage is easy with an on-board jumper.

Perfect for use with battery-powered equipment, the DC-DC Series is able to maintain variable speed control as the battery discharges. This results in an increase in running time of battery-operated equipment. The DC-DC Series is also ideal for many other types of portable equipment. The UL approved DC-DC Series comes with an extruded chassis for better heat sink transfer to the heatsink, more bus capacitance to handle ripple currents, a loose speed potentiometer and a convenient screw terminal block for wiring. With 1% speed regulation over an 80:1 speed range, the DCDC Series is the perfect solution for low voltage, DC-to-DC applications!

  • Low voltage motor operation: Designed for 12, 24, 36 and 48 VDC motors.
  • Speed range and regulation: 1% regulation over 80:1 speed range.
  • User adjustable calibration pots: IR compensation, max speed, min speed, acceleration and current limit. All are independent and non-interactive.
  • Diagnostic LEDs: Power.
  • Stopping modes: The user can coast the motor to a stop (N.O.) using inhibit circuitry.
  • Spade terminals and screw terminal block: Quick and easy connections.
  • DC input voltage: Accepts DC input and outputs DC voltage up to 95% of the input with near perfect form factor.
  • One drive for two motor voltages: On board jumper to select 12 or 24VDC motor (36 or 48VDC on some models).
  • Ideal for battery powered equipment: Maintains variable speed control even as battery voltage declines. Extends total running time of equipment.
  • Additional features: extruded chassis and non-interactive trimmer pots